9f7e9f0f

1.1.2. Start from an external source (other car)

Prevention

Before connection of the external accumulator make sure that ignition is switched off.

Make sure that all electric equipment (headlights, heating devices, screen wipers, etc.) is switched off.

Take all special precautions ordered on the accumulator into account.

Cars should not concern each other.

Make sure that the lever of gear shifting is in neutral situation (or Park, in case of automatic transmission).
PERFORMANCE ORDER
1. Connect one end of a red wire of big section to positive (+) the plug of the discharged accumulator.
2. Connect other end of a red wire to positive (+) the plug of the external accumulator.
3. Connect one end of a black wire of big section to the negative plug of the external accumulator.
4. Connect other end of a black wire of big section to the power unit or an element of a body of the started car far away from the accumulator.
5. Make sure that wires do not contact with the fan, driving belts or other rotating parts of the engine.
6. Start the engine, using an external source (at the same time the engine of the car source has to idle).
7. After start of the engine of the car with the discharged accumulator to disconnect wires in the return sequence.