9f7e9f0f

11:18. The directing lever of a back suspension bracket

Removal

PERFORMANCE ORDER
1. Lift a back part of the car and record on supports. Remove the corresponding back wheel.
2. Establish a jack under the external end of the lower lever and lift it so that the suspension bracket spring slightly contracted.
3. Unscrew a nut and take a hinged bolt of fastening of the directing lever to a pin.
4. Unscrew 3 bolts (are specified by shooters) fastenings of a suspension bracket of the directing lever to a body and remove assembly of the directing lever.

Repair

PERFORMANCE ORDER
1. Unscrew a nut and take the hinged bolt fixing a forward suspension bracket of the directing lever.
2. Clear the directing lever of dirt and an anticorrosive covering and check its state.

Installation

PERFORMANCE ORDER
1. Grease bolts with universal Molykote G Rapide Plus lubricant.
2. If the suspension bracket of the directing lever was removed, establish a hinged bolt of fastening of a suspension bracket and screw a new nut, without tightening it it is final.
3. Install the directing lever into place and fix a lever suspension bracket to a body by bolts.
4. Attach the directing lever to a pin, without tightening a nut finally.
5. Establish a wheel and lower the car. Shake the car that all elements of a suspension bracket fell into place. Tighten all bolts and nuts the required moment.