9f7e9f0f

12:18. Lock of a back door

Removal and installation

PERFORMANCE ORDER
1. Remove the negative plug from the accumulator.
2. Open a back door, unscrew screws and remove the internal handle of a door.
3. Using the screw-driver, remove a decorative overlay of the internal button.
4. Remove percussion caps of fastening of an upholstery of a back door.
5. Remove an internal upholstery of a back door.
Lock
6. Unscrew screws of fastening of the lock (a photo at the left), remove from the lock of draft and take the lock from a back door (a photo on the right).
Cylinder of the lock of a back door
7. Disconnect a bracket and separate draft from the lock.
8. Disconnect the electric socket from the engine of the central blocking of doors (a photo at the left), unscrew bolts and take the lock from a back door (a photo on the right).
Internal button of the lock
9. Remove the lock of a back door. Pay attention that the lock is connected to the button draft which needs to be disconnected from the lock and to take from a back door.
10. Release brackets of fastening and remove the button of the lock of a back door.
11. Installation is made in the sequence, the return to removal.