Peugeot:: 406: Check of bolts of a head of the block of cylinders

1. Maintenance instruction
2. Maintenance
3. Engine
4. Cooling systems, heating and ventilation
5. Fuel system
6. System of ignition
7. Coupling
8. Transmissions
9. Power shafts
10. Brake system
11. Suspension bracket and steering
12. Body
13. Electric equipment
14. Main malfunctions

3.2.13.2. Check of bolts of a head of the block of cylinders

PERFORMANCE ORDER

1. It is recommended to make replacement of bolts of fastening of a head of the block of cylinders every time at removal of a head.

2. Measure bolt length from the bolt head basis until the end of a bolt and compare it to the required value. With a length of bolt of 145,0-146,5 mm reuse of bolts with washers is possible, and with a bigger length it is necessary to replace bolts and washers with new.