| Rear-view mirror with manual adjustment |
| 1. Remove a rubber protective cover from the handle of adjustment of a mirror and remove internal decorative finishing of a mirror from a door. |
| 2. By means of the screw-driver take from cap doors. Unscrew screws and remove a mirror from a door. |
| Rear-view mirror with the electric drive |
|
|
3. Remove decorative finishing of a mirror from the inside of a door. |
|
|
| 4. By means of the screw-driver remove caps (are specified by shooters a photo at the left) from the inside of a door, unscrew screws (strelkm are specified a photo on the right) fastenings and remove a mirror from a door. |
|
5. Disconnect electric sockets from a mirror. |
| Mirror glass |
Prevention
Glass of a mirror is fixed in the holder of a mirror by conical connection. At removal of glass of a mirror it is very easy to break it therefore this work needs to be performed in gloves.
|
|
6. Reject a mirror against the stop up and insert a wide plastic or wooden plate between glass and the holder of a mirror. Take the lower part of a mirror from the holder. |
|
7. Remove glass of a mirror and disconnect the electric socket (it is specified by an arrow) heating of a mirror. |
| Engine of management of the provision of a mirror |
| 8. Remove mirror glass. |
|
9. Unscrew fastening screws (are specified by shooters), remove the engine and disconnect from it the electric socket. |
| 10. Installation is made in the sequence, the return to removal. |
