9f7e9f0f

6.1.6. Oil pressure sensor

Removal

PERFORMANCE ORDER
1. The sensor is located on the forward party of the block of cylinders over an oil filter.
2. Disconnect the negative plug of the accumulator.
3. Remove the protective cover closing the electric socket of the sensor, and switch-off the socket.
4. Unscrew the sensor from the block of cylinders and muffle an opening the corresponding stopper.

Installation

PERFORMANCE ORDER
1. Check consolidation of the sensor and if necessary replace.
2. Screw in the sensor in the block of cylinders and tighten the corresponding moment.
3. Connect the electric socket to the sensor.