| 1. Make a short trip for bringing the transmission to working temperature. |
| 2. Install the car on the elevator or over a viewing hole. |
| 3. Take the index of level of oil, then install a suitable container under a drain stopper of the transmission. The drain stopper is located in the center of a case of the transmission. |
| 4. Unscrew a drain stopper and merge oil from the transmission. Pay attention that only about 3 liters of oil since it is impossible to merge completely oil from the hydrotransformer merge. Clear a drain stopper and remove a sealing washer from a stopper. |
| 5. Establish a sealing washer on a stopper and screw up a stopper into place. |
| 6. Fill in oil in the transmission through an oil level measuring instrument pipe. |
| 7. In the course of an oil dolivka constantly control oil level. At achievement of level to the mark "MAX" in the measuring instrument of level stop a dolivka. Start the engine in the idling mode for several minutes. Switch off the engine and check oil level, if necessary add oil. Make a control trip and repeatedly check oil level. |
