8.2.3. Removal and installation of a cable of the selector
| PERFORMANCE ORDER |
| 1. Remove the case of the air filter. |
| 2. Install the selector lever in situation "P". |
| 3. In a motor compartment remove by means of the lever spherical hinged connection of a cable from the selector lever on the multipurpose switch of the transmission. |
| 4. Remove a bracket of fastening of a cable to an installation suspension bracket on the transmission. |
| 5. Remove the central panel. |
| 6. Lift a forward part of the car and record on supports. |
| 7. Remove final system and thermofilters. |
| 8. Disconnect a cable from all brackets of fastening. |
| 9. In interior of the car remove illumination of the lever of the selector and sheetings. Unscrew nuts of fastening of a casing of the lever of the selector to a floor. Remove a selector lever casing together with a cable from under the car. |
|
Removal of an automatic key of blocking of the regulator of a cable
|
|
For removal of an automatic key of blocking of the regulator (1) from a cable turn it counterclockwise and lift up. |
Installation
Installation is made in the sequence, the return to removal.
