9f7e9f0f

11:29. Pump of the amplifier of steering

Removal

PERFORMANCE ORDER
1. Weaken a tension of a driving belt and take off a belt from a pump pulley. The pump of the amplifier of steering is located above or below the generator of alternating current, depending on engine type. If the pump is located under the generator, access to it is most convenient from below the car.
2. Using G-shaped clips, press the giving and returnable hoses about a nutritious tank.
3. Unscrew a nut and remove a bracket of fastening of a hose in a back part of the pump.
4. Weaken a collar and remove the giving hose from the pump. Unscrew a nut and disconnect the bringing pipe.
5. Unscrew bolts of fastening of the pump and remove it from an arm.
6. If the pump has defects, it needs to be replaced assembled.

Installation

PERFORMANCE ORDER
1. Install the pump on an arm and fix by bolts.
2. Connect the bringing pipe to the pump and screw a connecting nut. Establish the bringing pipe to the pump and fix by a collar. Remove clips from hoses.
3. Establish a bracket of fastening of a hose to a back part of the pump.
4. Establish a driving belt on a pulley of the pump and adjust a tension.
5. Remove air from system.