9f7e9f0f

10:16. Unilateral valve of the vacuum amplifier of brakes

Removal

PERFORMANCE ORDER
1. Weaken a collar and disconnect a vacuum hose from the unilateral valve of the vacuum amplifier of brakes.
2. Take the valve from rubber ring consolidation, turning it in the parties and sipping on itself.
3. Remove the condensing rubber ring from the vacuum amplifier of brakes.

Check

PERFORMANCE ORDER
1. Check the unilateral valve for existence of damages. The valve can be checked, blowing it in two directions. Air has to pass through the valve only from the vacuum amplifier of brakes.
2. Check the rubber condensing ring and a vacuum hose for wear and damages. If necessary – replace.

Installation

PERFORMANCE ORDER
1. Establish the condensing rubber ring in the vacuum amplifier of brakes.
2. Insert the unilateral valve in the vacuum amplifier. At the same time be careful not to damage the rubber condensing ring.
3. Connect a vacuum hose to the valve and fix it by a collar.
4. Start the engine and check efficiency of the vacuum amplifier of brakes.