| Washer reservoir |
|
|
1. The tank of windscreen washer is located behind the right forward wing. In a motor compartment uncover a jellied mouth and unscrew a jellied mouth from a washer reservoir (the nut of fastening of a mouth is specified by an arrow). |
| 2. Lift a forward part of the car and record on supports. Remove the right forward wheel. Unscrew screws and remove a wheel arch insert. |
| 3. Merge liquid from a tank for what take a rubber stopper in the tank basis. After a liquid effluence from a tank establish a stopper into place. |
|
4. Release collars and disconnect hoses (1) from the washer pump. Disconnect the electric socket (2) from the pump of a washer and the sensor of level of liquid. |
|
5. Unscrew a bolt (it is specified by an arrow) fastenings of the top part of a tank and remove a tank. |
Prevention
Due to the limitation of space for unscrewing of a bolt of fastening of a tank, perhaps, it is necessary to remove a headlight.
|
| 6. Installation is made in the sequence, the return to removal. |
| Washer pump |
| 7. Disconnect the electric socket and a hose of supply of liquid from the pump. Merge liquid from a tank. |
| 8. Separate the pump from a tank and remove a sealing ring. |
| 9. Installation is made in the sequence, the return to removal. Establish a new sealing ring of the pump. |
| The liquid level sensor in a washer reservoir |
| 10. Lift a forward part of the car and record on supports. Remove the right forward wheel. Unscrew screws and remove a wheel arch insert. |
| 11. Disconnect the electric socket from the liquid level sensor in a washer reservoir and take the sensor from a tank. Remove a sealing ring. |
| 12. Installation is made in the sequence, the return to removal. Establish a new sealing ring of the sensor. |
| Windshield washers |
| 13. Open a cowl and disconnect hoses from a windshield washer. Press brackets of fastening and take a washer from a cowl. |
| 14. Installation is made in the sequence, the return to removal. Check the direction of a stream of the liquid given by a washer nozzle on a windshield. |
| Washer of a back door |
| 15. Open a back door, unscrew screws and remove a spoiler from the top part of a back door. |
| 16. Disconnect a hose of a washer and remove it from a spoiler. |
| 17. Installation is made in the sequence, the return to removal. |
| Washer of headlights |
| 18. Remove a front bumper. |
| 19. Disconnect a hose from a washer, unscrew screws of fastening and remove a headlight washer from a bumper. |
| 20. Installation is made in the sequence, the return to removal. |
