13:21. Control system cruise control
The control system a cruise control copes vacuum. Main elements of system: electronic control device (ECU), vacuum pump, electromagnetic valve, executive mechanism and cable. The system is run by the switch on a steering column and switches on a pedal of a brake and coupling.
Removal and installation
| PERFORMANCE ORDER |
| Electronic control device (ECU) |
| 1. The ECU block is located in a back part of a ware box. Remove the negative plug from the accumulator. |
| 2. Take hinged fingers and uncover a ware box from the dashboard. Unscrew the screw and uncover the dashboard for access to the ECU block. |
| 3. Remove percussion caps and a cover of the lower part of the dashboard from the passenger. |
| 4. Disconnect the electric socket, unscrew screws of fastening and remove the ECU block from the lower part of the dashboard. |
| Vacuum pump |
| 5. The vacuum pump is located in a motor compartment. Remove the negative plug from the accumulator. |
| 6. Disconnect the electric socket and a vacuum hose from the pump. Unscrew screws and remove the pump from an arm. |
| Electromagnetic valve |
| 7. The electromagnetic valve is located on an arm of fastening of the vacuum pump. |
| 8. Remove the negative plug from the accumulator, remove the electric socket and a vacuum hose from the electromagnetic valve. |
| 9. Unscrew screws and remove the electromagnetic valve from an arm in a motor compartment. |
| Executive mechanism and cable |
| 10. Remove a cable from the spherical hinge of a cam of a throttle. Remove a bracket of fastening and take a cable cover from an arm. |
| 11. Disconnect a vacuum hose from the executive mechanism, unscrew a nut and take the executive mechanism and a cable from a motor compartment. |
| 12. If necessary remove a bracket of fastening of a cover of a cable and separate a cable from the executive mechanism. |
| 13. Installation is made in the sequence, the return to removal. |
|
