13.5. Bulbs of external lighting
Replacement
Prevention
Before replacement of bulbs of external lighting check the corresponding electric chain and a safety lock.
Do not touch a glass flask of a lamp by hands. The fingerprint evaporates and besieged on a reflector therefore lighting worsens. Surely replace the failed lamps with lamps of the same type. Wipe the spots arising on imprudence from a touch with a pure lint-free rag or alcohol.
HEADLIGHT
PERFORMANCE ORDER |
|
1. Release brackets of fastening and uncover a back part of a headlight. |
|
2. Remove the electric socket from a back part of the glow lamp of a headlight. |
3. Squeeze spring brackets of fastening of a bulb and cast away them aside. Take a bulb from a headlight. |
4. Establish a new bulb so that ledges on the boss of a bulb were combined with headlight grooves, and fix a bulb by spring brackets. |
5. Connect the electric socket and establish a back cover of a headlight. |
|
FORWARD MARKER LIGHT
PERFORMANCE ORDER |
1. Release a bracket of fastening and remove a back cover from a headlight. |
2. Turn a cartridge of a dimensional lamp and take it from a headlight. Take a bulb from the boss, having pulled it on themselves. |
3. Installation is made in the sequence, the return to removal. |
|
FOG LIGHTS
PERFORMANCE ORDER |
1. Lift a forward part of the car and record on supports. |
|
2. Unscrew screws (are specified by shooters) and remove the plastic mudguard located under a fog light. |
|
|
3. Disconnect the electric socket (a photo at the left), release a bracket of fastening and remove a fog light (a photo on the right). |
|
4. Disconnect a spring clip (it is specified by an arrow) and take a reflector from the headlight case. |
|
|
5. Disconnect the electric socket (it is specified by an arrow a photo at the left), squeeze a spring of fastening of a bulb and take a bulb from a headlight (a photo on the right). |
6. Establish a new bulb so that ledges on the boss of a bulb were combined with headlight grooves, and fix by a spring bracket. |
7. Connect the electric socket and a spring bracket of fastening of a reflector in a headlight. |
8. Establish a headlight into place and fix by a fastening bracket. |
9. Connect the electric socket and establish into place plastic mudguards under a headlight. |
|
FORWARD INDEX OF TURN
PERFORMANCE ORDER |
1. For improvement of access to the forward left index of turn remove a protective cover from the accumulator. |
|
2. Turn a cartridge of a bulb of the forward index of turn counterclockwise and take it from a back part of the index of turn. For extraction of the glow lamp from the boss press it and in this situation turn on or counterclockwise. |
3. Installation is made in the sequence, the return to removal. |
|
SIDE REPEATER OF TURN
PERFORMANCE ORDER |
|
1. By means of the screw-driver take the side repeater of turn from a car wing. |
|
2. Turn a cartridge with a bulb counterclockwise and take it. For extraction of a bulb from the boss pull it on yourself. |
3. Installation is made in the sequence, the return to removal. |
|
BULBS OF THE BACK LAMP
PERFORMANCE ORDER |
|
1. In a back part of the luggage compartment unscrew screws and remove back finishing of a luggage carrier. Take percussion caps and remove a back upholstery of a luggage carrier. |
|
|
2. On some models for access to the left back lamp unscrew a connector (it is specified by an arrow a photo at the left), remove office of storage and turn off the left side finishing of a luggage carrier aside (a photo on the right). |
|
3. Release clamps and take a cartridge with a bulb from a back lamp. |
|
4. For extraction of a bulb from the boss press it and in this situation turn counterclockwise. |
5. Installation is made in the sequence, the return to removal. |
|
BULBS OF THE BACK LAMP ON THE KOMBI (ESTATE) MODELS
PERFORMANCE ORDER |
1. Remove a back lamp. |
|
2. Release clamps and remove the holder of bulbs from a back lamp. |
|
3. For extraction of a bulb from the holder of a back lamp press it and in this situation turn counterclockwise. |
4. Installation is made in the sequence, the return to removal. |
|
BULB OF ILLUMINATION OF REGISTRATION PLATE ON MODELS THE SEDAN (SALOON)
PERFORMANCE ORDER |
|
1. Release a bracket of fastening and remove a plafond from a lamp of illumination of registration plate. |
|
2. Take a bulb from the holder, having pulled it on themselves. |
3. Installation is made in the sequence, the return to removal. |
|
BULB OF ILLUMINATION OF REGISTRATION PLATE ON THE KOMBI (ESTATE) MODELS
PERFORMANCE ORDER |
|
1. Unscrew the screw and remove a plafond of a lamp of illumination of registration plate. |
|
2. Remove a bulb, having pulled it on themselves. |
3. Installation is made in the sequence, the return to removal. |
|