13.6. Lighting lamps of salon
Replacement
CARS WITH THE TOP CONSOLE
PERFORMANCE ORDER |
|
1. By means of the screw-driver remove a plafond of illumination of a forward part of salon from the top console. |
|
2. Take the lighting lamp of a forward part of salon, having pulled it from the boss. |
3. Installation is made in the sequence, the return to removal. |
|
CARS WITHOUT THE TOP CONSOLE
PERFORMANCE ORDER |
|
1. Using the thin screw-driver, remove a lamp of illumination of salon from a ceiling. |
|
2. Turn a cartridge with a bulb counterclockwise and take it from a lamp. |
|
3. For replacement of a bulb extend it from the boss. |
4. Installation is made in the sequence, the return to removal. |
|
BULBS OF ILLUMINATION OF THE COMBINATION OF DEVICES
PERFORMANCE ORDER |
1. Remove a combination of devices. |
|
2. Turn a cartridge of a bulb counterclockwise and take from a back part of a combination of devices. |
3. When replacing bulbs of illumination of a combination of devices use only bulbs of the same type and power. |
4. Establish a cartridge with bulbs in a combination of devices and turn it clockwise. Install a combination of devices in the dashboard. |
|
HEATER PANEL ILLUMINATION LAMPS
PERFORMANCE ORDER |
1. Remove the heater panel from the dashboard. |
2. Turn a cartridge with a bulb on or counterclockwise and remove from the control unit. |
3. Take a bulb from the boss, having pulled it on themselves. |
4. Installation is made in the sequence, the return to removal. |
|
LAMP OF ILLUMINATION OF HOURS
PERFORMANCE ORDER |
1. Remove hours. |
|
2. Turn a cartridge with a bulb on 90 ° and remove it from a side part of hours. |
3. Installation is made in the sequence, the return to removal. |
|
LAMP OF ILLUMINATION OF THE MULTIPURPOSE DISPLAY
PERFORMANCE ORDER |
1. Remove the multipurpose display. |
|
2. Turn a cartridge with a bulb on 90 ° and remove from the display. |
3. Installation is made in the sequence, the return to removal. |
|
BULBS OF ILLUMINATION OF SWITCHES
Bulbs of illumination of switches in most cases are an integral part of switches and cannot be replaced separately.