9f7e9f0f

1.1.30. Transmission

Automatic transmission 4HP20

And, Century. Buttons of switching of the modes

Start of the engine

For start of the engine put the gear shifting lever in position N or Ruble. Press a brake pedal at start of the engine and at inclusion of transfers.

Position of the lever of gear shifting

It is confirmed by indications of the index on the dashboard.

Р – parking. It is used at the same time with the parking brake at the parking of the car.

R – backing. This transfer can be included only after a full stop of the car and during the operation of the engine idling.

N – neutral transfer. If at the movement you incidentally put the lever in position N, then before to include any forward transfer, pass to idling.

D – driving. In this situation 4 transfers automatically join. The moments of gear shifting are chosen depending on the set program.

3 – automatically only 3 first transfers join. This situation is recommended in need of frequent switching with the 3rd to the 4th transfers (driving on the city or the twisting road).

2 or L – only 2 first transfers automatically join. this situation is especially convenient when driving on mountain roads since allows to use fully engine capacity at rises and to carry out braking by the engine on descents.

1 – only the first transfer is included. It is used on steep slopes, in particular when the trailer is towed.

Features of the AL4 transmission

Automatic AL4 transmission

 

At each inclusion of ignition signaling devices of S and * blink three times.

Inclusion of the first transfer is carried out from situation L when pressing the switch 1.

To find a way out 1, press the switch 1 again or move the gear shifting handle.

Programs of work

The transmission provides implementation of 3 programs of work:

 – automatic (normal);
 – sports;
 – driving on snow.

By single pressing buttons A or B the "sports" or "driving on snow" programs respectively join. The choice of the program is confirmed by the index on the dashboard. By new pressing buttons A or B there is a return to the "automatic" program.

Automatic (normal) program

Gear shifting happens automatically depending on a number of parameters: style of driving, road profile, loading of the car. The transmission continuously chooses that which is best of all adapted for traffic conditions from the written-down programs. Thus at moderate style of driving the program allowing to save fuel is chosen. At more bystry driving with intensive dispersals the transmission will choose more sports program with gear shifting at higher turns of the engine. Switching to the highest or lowest transfers happens on various modes depending on a road profile (horizontal, rise) and loadings of the car.

Sports program

The sports program allows to use sports style of driving and provides more bystry dispersals.

Program of driving for snow

In situation D the program of driving for snow which provides smooth driving on slippery roads for the purpose of improvement of coupling of wheels with the road and controllability joins. The car begins the movement on the second or third transfer depending on the required effort for start-off with the place, and switching to the lowest transfers happens at smaller turns of the engine.

In provisions 3, 2 or L the transmission works as manual. In situation 3 start-off from the place happens on the 3rd transfer and this transfer remains included in all the time. In situation 2 or L start-off from the place happens on the second transfer and this transfer remains included.

Features of work


At long braking the transmission automatically is switched to the lowest transfer for more effective braking by the engine.

If the accelerator pedal (for example, on the road you saw any obstacle) is sharply released, the transmission does not switch to the highest transfer. It serves increase in safety.

For the purpose of reduction of emission of toxic components the special program allowing the engine to get warm quicker up to the optimum temperature is used.

Switching to the lowest transfers

Quickly to receive the maximum acceleration at dispersal without touching the gear shifting lever, press against the stop the accelerator pedal. The transmission will automatically switch to the lowest transfer or will choose that transfer by which the engine develops the maximum power.
Prevention

Any malfunctions in system are followed by a simultaneous blinking on the dashboard of indicators S and *. At the same time it is possible to feel noticeable blow at turning on of the reverse gear (it does not threaten with breakage of the transmission).


If idling turns are increased, the car can start without pressing of the accelerator pedal.

Do not press the accelerator pedal when switching transfer when the car stands still.

At gear shifting the brake pedal has to be pressed.

If the car is slowed down, do not press the accelerator pedal by the included transfer.

Do not switch to the lowest transfer for braking on the slippery road.

Never put the gear shifting lever in position N, R or R if the car still slides.

Suspension bracket with electronic control

The suspension bracket automatically and immediately adapts to various styles of driving and a profile of the road, providing the greatest comfort of passengers and stability of the car. Thus the suspension bracket the most part of time remains soft, however at the rigid nature of driving (sports driving, sharp turns, overtakings) it automatically becomes more rigid that allows the car to keep optimum stability.

To choose the SPORT mode, press the switch 1. At the same time the light indicator will light up. In this position of the switch the suspension bracket works in the sports mode. To return to an automatic operating mode, press once again the switch 1. The indicator will go out.

Malfunction is determined by a signaling device on dashboards. It lights up approximately for 3 seconds at each inclusion of ignition. At a blinking of a signaling device malfunction of system is possible.