| 1. Remove the negative plug from the accumulator. |
| Forward door |
| 2. If at doors there are any electric elements, remove an upholstery of a door and a protective film. |
| 3. Disconnect sockets from electric elements and brackets of fastening. Remove the rubber condensing ring from a first line of a door. Take an electrical wiring from a door. |
| 4. A pencil or a felt-tip pen note position of each hinge of a door concerning a door for simplification of its further installation and adjustment. |
|
|
| 5. Unscrew bolts of fastening of an emphasis of a door to a rack (a photo at the left) and remove a rubber cover (a photo on the right). |
| 6. Supporting a door, unscrew bolts of fastening of the hinge and remove a door. |
| 7. If it is necessary to replace hinges of opening of a door, a marker note their situation on a door, unscrew bolts and remove hinges. |
| 8. Install new hinges according to earlier made tags and screw them bolts. |
| Back door |
|
9. Open a forward door for access to the socket of an electrical wiring of a back door. Turn a ring of blocking of the socket counterclockwise and remove the socket from a door. |
|
10. A pencil note position of each hinge concerning a door. Unscrew bolts (are specified by shooters) fastenings of an emphasis of a door to a rack and remove a rubber protective cover. Supporting a door, unscrew bolts of fastening of the hinge and remove a door. |
