12.8. Cowl


1. Open a cowl and place rags under cowl corners to exclude damages of a body at removal of a cowl.
2. Disconnect a windscreen washer hose on the right side of a cowl.
3. For the correct installation of a cowl into place a soft pencil note the provision of nuts on a cowl.
4. Supporting a cowl, remove brackets of fastening and separate support racks from a cowl.
5. Unscrew the left and right nuts of fastening of hinges to a cowl and remove a cowl.


Establish a cowl into place and fix by nuts, tightening them by hand. Level a cowl according to earlier made tags and put the clamps finally. Adjust the provision of a cowl so that at the closed cowl the gap on its perimeter was identical from all directions. For adjustment of a forward part of a cowl on height it is necessary to screw in or unscrew the rubber pillows located on a forward part of a motor compartment