3.1.15. Oil heater


1. Tighten the emergency brake, lift a forward part of the car and record on supports.
2. Merge cooling liquid from the cooling system or press cooling system hoses near the oil heater.
3. Install the corresponding container under an oil filter and unscrew the filter.
4. Weaken collars of fastening of hoses of the cooling system to the oil heater and remove hoses from a radiator.
5. Unscrew a bolt of fastening of the oil heater (A) to the block of cylinders and remove a radiator. Pay attention to the groove (V) located on a radiator ledge.


1. Establish a new round sealing ring from the back party of a radiator and install a radiator on the block of cylinders.
2. Combine an adjusting groove in a radiator with a ledge on the block of cylinders and fix a radiator by a bolt.
3. Establish an oil filter and lower the car. Check the level of engine oil.
4. Establish hoses of the cooling system on a radiator and check the level of cooling liquid. Start the engine and check tightness of installation of the oil heater.